www.deegee.com - The Home of Beacon Lamps and Hazard Warning Products D.G. Controls Limited - The Beacon Lamp Specialists
 Catalogue |  FAQs | Press | Exhibitions | Distributors | Sitemap | Contact Us | deegeeBLOG   Home 
deegee Applications Area Fire & Security  |  Vehicle & Traffic  |  Factory Automation
Marine  |  Aircraft Obstruction Warning
Explosionproof & Hazardous  |  Other		   

Solid State Flasher Units

By D.G. Controls Limited

FMU Series

 

The Solid-state Flasher Module (FMU/O) is designed to repetitively switch a load (up to 1A non-inductive) on/off at a rate of 40 pulses per minute.  50% duty-cycle (equal on/off periods) allows a load, such as a filament lamp, to achieve full brightness before switching off.

A small digital micro-controller is employed as standard, bringing the benefit of definitive and repetitive control.  This also allows customised flash-rate and/or flash-pattern to suit a user’s individual requirement.  Contact us for further details.

Supply Voltage 10-30v dc 115v ac 230v ac
Max load current 1A
Flash/min 40 fpm
(0.656Hz)
Temperature Limits -20C, +55C

Typical Order Code: FMU/O/AC/230
<<< Back
Click ME!Rotating LUXEON LED
STC Micro-Tower
LEDX - LED Lamp
Stacking Beacons
Tower Beacons
Indicator Panels
LED Beacons
Explosionproof
Rotating Mirror
Xenon Strobe
Duplex
Pulsed
Static
Multihead
Vehicle
Telephone
Battery
Click ME!Sounders
Flasher
Modules
FMU
Click ME!Combined Beacons and Sounders
 
 
Installation
Notes
 
 
<<< Back
 
 
 
Request further information
Investor In People D.G. Controls Limited
Cadley Hill Road
Swadlincote
Derbyshire
DE11 9TB
ENGLAND

Tel: +44 (0) 1283 550850
Fax: +44 (0) 1283 550776
Click HERE to contact us

D.G. Controls Limited - UL Registerd Firm - ISO9001 - A8530 

www.beaconlamps.com

"The Leading-Light in Warning Beacons"

Celebrating 13 years online - 1995 to 2008!
Terms and Conditions of Sale | Legal Notices

Copyright © Reserved

Whilst every effort has been made to ensure the accuracy of this information, we operate a policy of continuous improvement, and reserve the right to alter models and specifications without notice.  All values and specifications are nominal rather than exact, and where applicable, are with the rated supply voltage only, using new lamps and components.  All information is given in good faith but without guarantee to performance figures.  Where shown all dimensions are in mm unless specifically indicated otherwise.  E&OE

23/06/09