D.G. Controls Limited

+44 (0) 1283 550850

The Beacon Lamp Specialists

LED Status Indicators - IPC & IPN Series

Latest technology Light Emitting Diodes (LEDs) configured into a high-density matrix. This advanced range of LED Indicator Panels is ideally suited to a wide variety of applications such as Loading-Bay Signalling, Shutter Door Status, On-Site Traffic Management, Dockside Signalling, Factory Control, “FIRE” Alarm Warning, “STOP” Signalling, etc.

Series IPC: Standard 24Vdc, 115Vac and 230Vac models are available and all units are modular IP65 UV-stabilised ABS housing with polycarbonate lens (94mm dia. x 85mm high) for protection against the elements.

Series IPN: Standard 24Vdc, 115Vac and 230Vac models are available and all units are enclosed in an IP65 UV-stabilised polycarbonate housing (200x150x80mm) for protection against the elements.

Single colour units employ a front lens the same colour as the indicating LEDs, whilst dual colour units employ a neutral ‘smoked’ front lens.

Standard colour combinations are shown; other colours and colour combinations available from a choice of Red, Amber, Green, Blue or Clear, available to special order.

IPC/010

Red Cross Indicator

94mm dia.
85mm high

Single Red Cross Indicator
IP65
Multiple units may be linked together for composite signal

Dimensions and Mounting

Instruction Sheet

Data Sheet

IPC/012

Green Arrow Direction Status Indicator

94mm dia.
85mm high

Single Green Arrow Direction Status Indicator
IP65
Cover can be rotated in 90 degree increments to position arrow for Up, Down, Left or Right indication
Multiple units may be linked together for composite signal

Dimensions and Mounting

Instruction Sheet

Data Sheet

IPN/021

No Entry Status Indicator

94mm dia.
85mm high

Red Circle with White Bar Status Indicator
IP65
Cover can be rotated in 90 degree increments to position arrow for Up, Down, Left or Right indication
Multiple units may be linked together for composite signal

Dimensions and Mounting

Instruction Sheet

Data Sheet

IPN/001

Direction Status Indicator

200x150x80mm.

Direction Status Indicator
IP65
Can show any combination of green-arrow-left, green-arrow-right and red-cross
Function selection by applying power to relevant terminals
Can be rotated 90° to indicate up/down

Dimensions and Mounting

Instruction Sheet

Data Sheet

deegee MB8 Wall Mounting Bracket

IPN/002

Stop / Go Traffic Light

200x150x80mm.

Stop/Go "Traffic-Light" status indicator
IP65
Ideal for Loading Bay and Traffic Management applications
High-density LED-matrix light-source
Long-life (>100,000 hours typical) LEDs

Dimensions and Mounting

Instruction Sheet

Data Sheet

deegee MB8 Wall Mounting Bracket

IPN/003

"Fire" Warning Indicator

200x150x80mm.

"FIRE" Warning Indicator
IP65
Dedicated, clear, distinct and insistent warning signal
Pulsed/Static operation by simple jumper link
Ideal for wide-area and large office environments
High-density LED-matrix light-source

Dimensions and Mounting

Instruction Sheet

Data Sheet

deegee MB8 Wall Mounting Bracket

IPN/005

Wig-Wag Indicator

200x150x80mm.

Wig-Wag Indicator
IP65
Dual colour indicator
Alternate and concurrent flashing modes
High-density LED-matrix light-source
Long-life (>100,000 hours typical) LEDs
2 x single colour (e.g. Amber/Amber) or 1 of 2 different colours (e.g. Red/White)
Available in:-