Pulsed Filament Beacons

By D.G. Controls Limited

PST Series

Latest heavy-duty industrial hazard warning beacon.
Unique ratchet system allowing two or more units to be linked together and orientated in respect to each other at 10 degree intervals.
Incorporates external fixing holes - 4 x 6.5mm dia. on 120 x 120mm pattern.
Alternate drillouts on 51mm centres and 3 drillouts on 100mm PCD.
Dual M20 entries - Blanking plug and cable gland supplied.
High grade engineering, UV-stabilised Polycarbonate Base and Lens.

Filament lamp (B15D) model

Solid-state operation.
12Vdc, 24Vdc, 115Vac and 230Vac versions.
24Vac version available to order - See 24Vdc versions for specification.
50% duty cycle (equal on/off periods).
Terminals on-board for additional slave beacons - up to rated maximum slave load.
360° All-round and 270° All-over visibility.
Alternative lamps and lamp caps available, e.g. E14.

Lens Colours:

Typical Order Code: PST/DC/12/B15D/Green

	D.G. Controls Limited Cadley Hill Road Swadlincote Derbyshire DE11 9TB ENGLAND Tel: +44 (0) 1283 550850 Fax: +44 (0) 1283 550776 Click HERE to contact us
www.beaconlamps.com "The Leading-Light in Warning Beacons" Celebrating 13 years online - 1995 to 2008!
Terms and Conditions of Sale | Legal Notices Copyright © Reserved Whilst every effort has been made to ensure the accuracy of this information, we operate a policy of continuous improvement, and reserve the right to alter models and specifications without notice.  All values and specifications are nominal rather than exact, and where applicable, are with the rated supply voltage only, using new lamps and components.  All information is given in good faith but without guarantee to performance figures.  Where shown all dimensions are in mm unless specifically indicated otherwise.  E&OE

01/01/08