D.G. Controls Limited - PSM Series Mini Pulsed Flashing Beacon Lamps

Catalogue \| FAQs \| Press \| Exhibitions \| Distributors \| Sitemap \| Contact Us \| deegeeBLOG		Home

	Fire & Security \| Vehicle & Traffic \| Factory Automation Marine \| Aircraft Obstruction Warning Explosionproof & Hazardous \| Other

Pulsed Filament Beacons

By D.G. Controls Limited

PSM Series

Heavy-duty version of the innovative Series L hazard warning beacon.
Cast aluminium base (LM4-M - Al Si5 Cu3 Mn).
Cast aluminium base complements the thick-walled dome lens with optimised external lens ribbing for enhanced long-range visibility.
Incorporates four fixing holes on 90 x 120mm centres for direct surface mounting or clamping (clamps not supplied).
Threaded M20 entries in base and side for direct conduit/gland coupling.

Cage Guard :	G3
Wall Mounting Brackets:	MB7

Filament lamp (B15D) model

Solid-state operation.
12Vdc, 24Vdc, 115Vac and 230Vac versions.
24Vac version available to order - see 24Vdc versions for specification.
50% duty cycle (equal on/off periods).
Terminals on-board for additional slave beacons - up to rated maximum slave load.
360° All-round and 270° All-over visibility.

Lens Colours:

Supply voltage		12v dc	24v dc	115v ac	230v ac
Supply voltage limits		+/- 15%
Supply current		1.75A	875mA	130mA	65mA
Luminous Intensity	Red	15Cd		11Cd	19Cd
	Amber	45Cd		34Cd	56Cd
	Green	27Cd		20Cd	34Cd
	Blue	9Cd		7Cd	11Cd
	Clear	60Cd		45Cd	75Cd
Lamp Rating		21W		15W	25W
Max Slave Load		48W		180W	360W
Flash/min SH		40 fpm
Temperature limits		-20C, +55C
IEC protection class		IP65

Typical Order Code: PSM/AC/230/B15D/Red

Halogen (TH) model

Solid-state operation.
12Vdc and 24Vdc versions.
24Vac version available to order - see 24Vdc versions for specification.
50% duty cycle (equal on/off periods).
Terminals on-board for additional slave beacons - up to rated maximum slave load.
360° All-round and 270° All-over visibility.

Lens Colours:

Supply voltage		12v dc	24v dc
Supply voltage limits		+/- 15%
Supply current		1.6A	800mA
Luminous Intensity	Red	21Cd
	Amber	63Cd
	Green	38Cd
	Blue	13Cd
	Clear	84Cd
Lamp Rating		20W
Max Slave Load		48W
Flash/min SH		40 fpm
Temperature limits		-20C, +55C
IEC protection class		IP65

Typical Order Code: PSM/DC/24/TH20/Red

Pulsed
PSD
PSR
PSS
PSL
PSM
PSE
PSK
PSH
PSJ
PSG
PST

Combined Beacons and Sounders

Installation
Notes

<<< Back

Request further information


	D.G. Controls Limited Cadley Hill Road Swadlincote Derbyshire DE11 9TB ENGLAND Tel: +44 (0) 1283 550850 Fax: +44 (0) 1283 550776 Click HERE to contact us
www.beaconlamps.com "The Leading-Light in Warning Beacons" Celebrating 13 years online - 1995 to 2008!
Terms and Conditions of Sale \| Legal Notices Copyright © Reserved Whilst every effort has been made to ensure the accuracy of this information, we operate a policy of continuous improvement, and reserve the right to alter models and specifications without notice. All values and specifications are nominal rather than exact, and where applicable, are with the rated supply voltage only, using new lamps and components. All information is given in good faith but without guarantee to performance figures. Where shown all dimensions are in mm unless specifically indicated otherwise. E&OE

01/01/08