D.G. Controls Limited - PSH Series Pulsed Flashing Beacon Lamps

Catalogue \| FAQs \| Press \| Exhibitions \| Distributors \| Sitemap \| Contact Us \| deegeeBLOG		Home

	Fire & Security \| Vehicle & Traffic \| Factory Automation Marine \| Aircraft Obstruction Warning Explosionproof & Hazardous \| Other

Pulsed Filament Beacons

By D.G. Controls Limited

PSH Series

Hi-top industrial, vehicle, security and obstruction hazard warning beacon with smooth exterior for easy wipe-down cleaning.
Incorporates fixing drillouts on 51mm centres for direct conduit box mounting (gasket supplied) with alternative 3 drillouts on 100mm PCD and further 3 drillouts on 130mm PCD.
Central 20mmŲ drillout for cable entry in base. High grade engineering, UV-stabilised plastics (ABS Base, Polycarbonate Lens).

Cage Guard :	G5
Wall Mounting Brackets:	MB1, MB1A or MB7

Filament lamp (B15D) model

Solid-state operation.
12Vdc, 24Vdc, 115Vac and 230Vac versions.
24Vac version available to order - see 24Vdc versions for specification.
50% duty cycle (equal on/off periods).
Terminals on-board for additional slave beacons - up to rated maximum slave load.
360° All-round and 270° All-over visibility.
Alternative lamps and lamp caps available, e.g. E14 or E27.

Lens Colours:

Supply voltage		12v dc	24v dc	115v ac	230v ac
Supply voltage limits		+/- 15%
Supply current		4A	2A	520mA	260mA
Luminous Intensity	Red	13Cd		15Cd
	Amber	38Cd		45Cd
	Green	23Cd		27Cd
	Blue	8Cd		9Cd
	Clear	50Cd		60Cd
Lamp Rating		48W		60W
Max Slave Load		21W	48W	120W	300W
Flash/min SH		40 fpm
Temperature limits		-20C, +55C
IEC protection class		IP65

Typical Order Code: PSH/AC/230/B15D/Amber

Halogen (TH) model

Solid-state operation.
12Vdc and 24Vdc versions.
24Vac version available to order - see 24Vdc versions for specification.
50% duty cycle (equal on/off periods).
Terminals on-board for additional slave beacons - up to rated maximum slave load.
360° All-round and 270° All-over visibility.

Lens Colours:

Supply voltage		12v dc	24v dc
Supply voltage limits		+/- 15%
Supply current		4.6A	2.95mA
Luminous Intensity	Red	25Cd	35Cd
	Amber	75Cd	105Cd
	Green	45Cd	63Cd
	Blue	15Cd	21Cd
	Clear	100Cd	140Cd
Lamp Rating		55W	70W
Max Slave Load		12W	48W
Flash/min SH		40 fpm
Temperature limits		-20C, +55C
IEC protection class		IP65

Typical Order Code: PSH/DC/24/TH70/Red

Pulsed
PSD
PSR
PSS
PSL
PSM
PSE
PSK
PSH
PSJ
PSG
PST

Combined Beacons and Sounders

Installation
Notes

<<< Back

Request further information


	D.G. Controls Limited Cadley Hill Road Swadlincote Derbyshire DE11 9TB ENGLAND Tel: +44 (0) 1283 550850 Fax: +44 (0) 1283 550776 Click HERE to contact us
www.beaconlamps.com "The Leading-Light in Warning Beacons" Celebrating 13 years online - 1995 to 2008!
Terms and Conditions of Sale \| Legal Notices Copyright © Reserved Whilst every effort has been made to ensure the accuracy of this information, we operate a policy of continuous improvement, and reserve the right to alter models and specifications without notice. All values and specifications are nominal rather than exact, and where applicable, are with the rated supply voltage only, using new lamps and components. All information is given in good faith but without guarantee to performance figures. Where shown all dimensions are in mm unless specifically indicated otherwise. E&OE

01/01/08