Pulsed Filament Beacons

By D.G. Controls Limited

PSE Series

The industrial hazard warning beacon setting the standard against which all others are measured.
Incorporates fixing drill-outs on 51mm centres for direct conduit box mounting (gasket supplied) with alternative 3 drill-outs on 100mm PCD.
Central 20mmŲ entry in base and two side flat pads to allow for alternative entries.
High grade engineering, UV-stabilised plastics (ABS Base, Polycarbonate Lens).

Filament lamp (B15D) model

Solid-state operation.
12Vdc, 24Vdc, 115Vac and 230Vac versions.
24Vac version available to order - See 24Vdc versions for specification.
50% duty cycle (equal on/off periods).
Terminals on-board for additional slave beacons - up to rated maximum slave load.
360° All-round and 270° All-over visibility.
Alternative lamps and lamp caps available, e.g. E14.

Lens Colours:

Typical Order Code: PSE/DC/12/B15D/Green

	D.G. Controls Limited Cadley Hill Road Swadlincote Derbyshire DE11 9TB ENGLAND Tel: +44 (0) 1283 550850 Fax: +44 (0) 1283 550776 Click HERE to contact us
www.beaconlamps.com "The Leading-Light in Warning Beacons" Celebrating 13 years online - 1995 to 2008!
Terms and Conditions of Sale | Legal Notices Copyright © Reserved Whilst every effort has been made to ensure the accuracy of this information, we operate a policy of continuous improvement, and reserve the right to alter models and specifications without notice.  All values and specifications are nominal rather than exact, and where applicable, are with the rated supply voltage only, using new lamps and components.  All information is given in good faith but without guarantee to performance figures.  Where shown all dimensions are in mm unless specifically indicated otherwise.  E&OE

01/01/08