LED Beacon Lamps

By D.G. Controls Limited

E Series

The industrial hazard warning beacon setting the standard against which all others are measured.
Incorporates fixing drill-outs on 51mm centres for direct conduit box mounting (gasket supplied) with alternative 3 drill-outs on 100mm PCD.
Central 20mmØ entry in base and two side flat pads to allow for alternative entries.
High grade engineering, UV-stabilised plastics (ABS Base, Polycarbonate Lens).

Revolving LED model

Solid-state LED beacon with revolving (simulated rotating) light effect.
360° All-round visibility.
No moving parts.
High density LED matrix.
Long-life LEDs (>100,000 hours typical).
Ultra-low current draw relative to achieved light output.

Lens Colours:

Typical Order Code: RFE/AC/115/LED/Red

Pulsed LED model

Pulsed beacon incorporating high density LED matrix.
360° All-round visibility.
Long-life LEDs (>100,000 hours typical).
50% duty cycle (equal on/off periods).
User selectable pulsed/static (flashing/non-flashing) operation by simple jumper link change.
Very low current draw.

Lens Colours:

Typical Order Code: PSE/DC/12/LED/Amber

Static LED model

Static (non-flashing) LED beacon
360° All-round visibility.
Meets ICAO requirements for Low Intensity Obstruction Warning (Red only).
High-density LED Matrix.
Long-life LEDs (>100,000 hours typical).
Ideal low-current slave to conventional deegee pulsed beacons (not LED).

Lens Colours:

Typical Order Code: SBE/AC/230/LED/Red

Static LED model (360º "All-round" and 270º "All-over" viewing)

Static (non-flashing) LED beacon.
360° All-round’ and 270° All-over visibility.
Meets ICAO requirements for Low Intensity Obstruction Warning (Red only).
Additional 48Vdc model for specialist applications.
High-density LED Matrix.
Long-life LEDs (>100,000 hours typical).
Ideal low-current slave to conventional deegee pulsed beacons (not LED).

Lens Colours:

Typical Order Code: SBE/AC/230/AOV-LED/Red

Multi-function (MFE/LED) model

High density matrix of long-life LEDs.
Multiple functions selectable by either on-board jumper links or external switching.
360° All-round visibility.
Single unit can indicate eight different switchable warning signals (see below).

Lens Colours:

The MFE/LED beacon is a multi-function product with a total of 8 modes of operation.   The operating modes are user selectable using three on-board jumper links or, optionally, wiring into an on-board terminal block.

Typical Order Code: MFE/DC/24/LED/Amber

	D.G. Controls Limited Cadley Hill Road Swadlincote Derbyshire DE11 9TB ENGLAND Tel: +44 (0) 1283 550850 Fax: +44 (0) 1283 550776 Click HERE to contact us
www.beaconlamps.com "The Leading-Light in Warning Beacons" Celebrating 13 years online - 1995 to 2008!
Terms and Conditions of Sale | Legal Notices Copyright © Reserved Whilst every effort has been made to ensure the accuracy of this information, we operate a policy of continuous improvement, and reserve the right to alter models and specifications without notice.  All values and specifications are nominal rather than exact, and where applicable, are with the rated supply voltage only, using new lamps and components.  All information is given in good faith but without guarantee to performance figures.  Where shown all dimensions are in mm unless specifically indicated otherwise.  E&OE

01/01/08